2026 Husqvarna® Power Gas Chainsaws 365 X-Torq 20" Bar, .3/8" Pitch

Information

2026 Husqvarna® Power Gas Chainsaws 365 X-Torq 20" Bar, .3/8" Pitch

Professional 71cc chainsaw with fuel-efficient engine

Husqvarna 365 is a saw for typical professional use. It has been developed in close cooperation with professional users working in the most demanding conditions. The low weight and high power are combined with a rugged engine, making this saw exceptionally versatile and suited for a wide variety of applications.

The X-TORQ engine gives you a much more environmentally friendly saw with radically lower exhaust emission level and fuel consumption.

Features may include:

Powerful and Efficient X-TORQ® Engine
  • X-Torq® engines deliver a great power and torque thanks to highly efficient combustion.
Air Injection™ Technology
  • Centrifugal air cleaning system expels larger dust and debris particles before they reach the air filter to help improve engine life
Magnesium crankcase
  • Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life
Quick-Release Air Filter
  • Easily remove and replace the filter after cleaning
Adjustable Oil Pump
  • Customize and control oil flow to meet any need

Photos

Highlights

  • Halifax, Massachusetts
  • 2026
  • Husqvarna® Power
  • Gas Chainsaws 365 X-Torq 20" Bar, .3/8" Pitch
  • Available

Specifications

  • 2026
  • Husqvarna® Power
  • Gas Chainsaws
  • 365 X-Torq 20" Bar, .3/8" Pitch
  • General
  • 70.7 cm³
  • Output shaft: 4.9 hp
  • max: 3.8 Nm @ 6,600 rpm
  • Idling: 2,700 rpm | Maximum power: 10,200 rpm
  • Champion RCJ7Y, NGK BPMR7A
  • Husqvarna 2 stroke or equiv. at 50:1
  • (CO2 EU V): 747 g/kWh
  • engagement speed (±120): 3,500 rpm
  • Chain at max power: 74.5 fts
  • Equivalent vibration level (ahv, eq) rear/front handle: 8 m/s²/ 5.7 m/s²
  • Sound pressure level at operators ear (LpA): 110 dB(A) | Sound power level, guaranteed (LWA): 119 dB(A) | Sound power level, measured: 118 dB(A)
  • Oil: Adjustable flow, no flow at idle
  • Electrode gap: 0.02 in | Ignition module air gap: 0.01 in | Gauge: .058"
  • Bar: 20 in (50 cm) | Recommended bar min/max: 16 in/28 in
  • 3/8"
  • Tank: 0.89 US pint | Oil pump, max/min: 20 ml/min / 4 ml/min
  • excl. cutting equipment: 14.1 lbs
  • Sprocket type: Rim 7
  • H42